Java Service Wrapper 安装 jar包 为windows系统服务(springboot)
说明:在windows下java service wrapper将java服务和对应的jre环境安装为windows服务,不用单独配置环境变量,实现开机自启动,此文章只包含简单使用,进阶教程可以查阅相关文档
- 下载
首先从官网下载对应的压缩包http://www.krenger.ch/blog/category/windows/
注意区分32位还是64位 - 解压,将下载的压缩包解压
- 新建一个文件夹,这个就是后面的整体安装文件夹java-jsw,并在文件夹下新建bin、conf、lib、logs、jre文件夹
- 打开解压的文件,将src/bin复制到你新建的文件夹bin目录下(去掉.in),wrapper.exe在把解压后文件夹中bin下
复制下面的文件
- 将
src\conf
中的文件复制到新建的conf
文件夹中。把in后缀去掉,其实只有一个文件,即wrapper.conf
- 把解压后的文件夹中
lib
中的wrapper.jar
与wrapper.dll
放到新建的lib
下面。同时把启动jar包程序所需要的第三方jar包也放在这里
- 配置jre环境,如果待安装电脑存在java环境可以省略此步骤,也不用建jre文件夹
将你本机的jre包复制一份到jre文件中
- 修改配置文件
- 修改java环境变量
#配置java环境变量,这里我直接用我们刚刚安装的jre,
#如果本机有你可以按照下面注释的内容JAVA_HOME配置上地址即可
wrapper.java.command=../jre/bin/javaw.exe
#set.JAVA_HOME=你的java环境路径
#wrapper.java.command=%JAVA_HOME%/bin/java
- 修改jar包路径,如果有多个可以复制使用.2 等等
wrapper.java.classpath.1=../lib/*.jar
wrapper.java.library.path.1=../lib
- 修改主启动类
wrapper.app.parameter.1=com.xxx.test.xxxxApplication
- 修改服务描述信息
wrapper.name=test
# Display name of the service
wrapper.displayname=test
# Description of the service
wrapper.description=test server
- 配置日志打印路径 YYYYMMDD表示安装日期分开
wrapper.logfile=../logs/run-YYYYMMDD.log
- 设置服务的启动模式
wrapper.startup.mode=AUTO
完整的配置文件在文章最后
9. 点击bin文件夹下面的App.bat进行测试,出现配置错误会进行提示
10. 安装服务,点击InstallApp-NT.bat安装服务,也可以点击UninstallApp-NT.bat卸载服务
打开服务可以看到我们刚刚安装的服务已经注册到系统服务中
右键点击启动即可启动服务,或者使用bin文件夹下的start.sh脚本也可以
完整的配置文件
# encoding=UTF-8
# Configuration files must begin with a line specifying the encoding
# of the the file.
#********************************************************************
# Wrapper License Properties (Ignored by Community Edition)
#********************************************************************
# Professional and Standard Editions of the Wrapper require a valid
# License Key to start. Licenses can be purchased or a trial license
# requested on the following pages:
# http://wrapper.tanukisoftware.com/purchase
# http://wrapper.tanukisoftware.com/trial
# Include file problems can be debugged by leaving only one '#'
# at the beginning of the following line:
##include.debug
# The Wrapper will look for either of the following optional files for a
# valid License Key. License Key properties can optionally be included
# directly in this configuration file.
#include ../conf/wrapper-license.conf
#include ../conf/wrapper-license-%WRAPPER_HOST_NAME%.conf
# The following property will output information about which License Key(s)
# are being found, and can aid in resolving any licensing problems.
#wrapper.license.debug=TRUE
#********************************************************************
# Wrapper Localization
#********************************************************************
# Specify the language and locale which the Wrapper should use.
#wrapper.lang=en_US # en_US or ja_JP
# Specify the location of the language resource files (*.mo).
wrapper.lang.folder=../lang
#********************************************************************
# Wrapper Java Properties
#********************************************************************
# Java Application
# Locate the java binary on the system PATH:
wrapper.java.command=../jre/bin/javaw.exe
# Specify a specific java binary:
#set.JAVA_HOME=/java/path
#wrapper.java.command=%JAVA_HOME%/bin/java
# Tell the Wrapper to log the full generated Java command line.
wrapper.java.command.loglevel=DEBUG
# Java Main class. This class must implement the WrapperListener interface
# or guarantee that the WrapperManager class is initialized. Helper
# classes are provided to do this for you.
# See the following page for details:
# http://wrapper.tanukisoftware.com/doc/english/integrate.html
wrapper.java.mainclass=org.tanukisoftware.wrapper.WrapperSimpleApp
# Log level for notices about missing Java Classpath entries.
wrapper.java.classpath.missing.loglevel=WARN
# Java Classpath (include wrapper.jar) Add class path elements as
# needed starting from 1
wrapper.java.classpath.1=../lib/*.jar
#wrapper.java.classpath.2=../lib/wrapper.jar
# Java Library Path (location of Wrapper.DLL or libwrapper.so)
wrapper.java.library.path.1=../lib
# Java Bits. On applicable platforms, tells the JVM to run in 32 or 64-bit mode.
wrapper.java.additional.auto_bits=TRUE
# Java Additional Parameters
wrapper.java.additional.1=
# Initial Java Heap Size (in MB)
#wrapper.java.initmemory=3
# Maximum Java Heap Size (in MB)
#wrapper.java.maxmemory=64
# Application parameters. Add parameters as needed starting from 1
#wrapper.app.parameter.1=org.springframework.boot.loader.JarLauncher
wrapper.app.parameter.1=com.lc.test.TestApplication
#********************************************************************
# Wrapper Logging Properties
#********************************************************************
# Enables Debug output from the Wrapper.
# wrapper.debug=TRUE
# Format of output for the console. (See docs for formats)
wrapper.console.format=PM
# Log Level for console output. (See docs for log levels)
wrapper.console.loglevel=INFO
# Log file to use for wrapper output logging.
wrapper.logfile=../logs/run-YYYYMMDD.log
# Format of output for the log file. (See docs for formats)
wrapper.logfile.format=LPTM
# Log Level for log file output. (See docs for log levels)
wrapper.logfile.loglevel=INFO
# Roll mode of the log file.
# SIZE_OR_WRAPPER causes the file to be rolled whenever its size exceeds the
# value defined by wrapper.logfile.maxsize, or whenever the Wrapper is
# launched.
wrapper.logfile.rollmode=DATE
# Maximum size that the log file will be allowed to grow to before
# the log is rolled. Size is specified in bytes. The default value
# of 0, disables log rolling. May abbreviate with the 'k' (kb) or
# 'm' (mb) suffix. For example: 10m = 10 megabytes.
wrapper.logfile.maxsize=10m
# Maximum number of rolled log files which will be allowed before old
# files are deleted. The default value of 0 implies no limit.
wrapper.logfile.maxfiles=15
# Log Level for sys/event log output. (See docs for log levels)
wrapper.syslog.loglevel=NONE
#********************************************************************
# Wrapper General Properties
#********************************************************************
# Allow for the use of non-contiguous numbered properties
wrapper.ignore_sequence_gaps=TRUE
# Do not start if the pid file already exists.
wrapper.pidfile.strict=TRUE
# Title to use when running as a console
wrapper.console.title=test
#********************************************************************
# Wrapper JVM Checks
#********************************************************************
# Detect DeadLocked Threads in the JVM. (Requires Standard Edition)
wrapper.check.deadlock=TRUE
wrapper.check.deadlock.interval=30
wrapper.check.deadlock.action=RESTART
wrapper.check.deadlock.output=FULL
# Out Of Memory detection.
# Ignore -verbose:class output to avoid false positives.
wrapper.filter.trigger.1000=[Loaded java.lang.OutOfMemoryError
wrapper.filter.action.1000=NONE
# (Simple match)
wrapper.filter.trigger.1001=java.lang.OutOfMemoryError
# (Only match text in stack traces if -XX:+PrintClassHistogram is being used.)
#wrapper.filter.trigger.1001=Exception in thread "*" java.lang.OutOfMemoryError
#wrapper.filter.allow_wildcards.1001=TRUE
wrapper.filter.action.1001=RESTART
wrapper.filter.message.1001=The JVM has run out of memory.
#********************************************************************
# Wrapper Email Notifications. (Requires Professional Edition)
#********************************************************************
# Common Event Email settings.
#wrapper.event.default.email.debug=TRUE
#wrapper.event.default.email.smtp.host=
#wrapper.event.default.email.smtp.port=25
#wrapper.event.default.email.subject=[%WRAPPER_HOSTNAME%:%WRAPPER_NAME%:%WRAPPER_EVENT_NAME%] Event Notification
#wrapper.event.default.email.sender=
#wrapper.event.default.email.recipient=
# Configure the log attached to event emails.
#wrapper.event.default.email.maillog=ATTACHMENT
#wrapper.event.default.email.maillog.lines=50
#wrapper.event.default.email.maillog.format=LPTM
#wrapper.event.default.email.maillog.loglevel=INFO
# Enable specific event emails.
#wrapper.event.wrapper_start.email=TRUE
#wrapper.event.jvm_prelaunch.email=TRUE
#wrapper.event.jvm_start.email=TRUE
#wrapper.event.jvm_started.email=TRUE
#wrapper.event.jvm_deadlock.email=TRUE
#wrapper.event.jvm_stop.email=TRUE
#wrapper.event.jvm_stopped.email=TRUE
#wrapper.event.jvm_restart.email=TRUE
#wrapper.event.jvm_failed_invocation.email=TRUE
#wrapper.event.jvm_max_failed_invocations.email=TRUE
#wrapper.event.jvm_kill.email=TRUE
#wrapper.event.jvm_killed.email=TRUE
#wrapper.event.jvm_unexpected_exit.email=TRUE
#wrapper.event.wrapper_stop.email=TRUE
# Specify custom mail content
wrapper.event.jvm_restart.email.body=The JVM was restarted.\n\nPlease check on its status.\n
#********************************************************************
# Wrapper Windows Service Properties
#********************************************************************
# WARNING - Do not modify any of these properties when an application
# using this configuration file has been installed as a service.
# Please uninstall the service before modifying this section. The
# service can then be reinstalled.
# Name of the service
wrapper.name=test
# Display name of the service
wrapper.displayname=test
# Description of the service
wrapper.description=test server
# Service dependencies. Add dependencies as needed starting from 1
wrapper.ntservice.dependency.1=
# Mode in which the service is installed.
# AUTO_START, DELAY_START (Requires Standard Edition) or DEMAND_START
wrapper.ntservice.starttype=AUTO_START
# Allow the service to interact with the desktop (Windows NT/2000/XP only).
wrapper.ntservice.interactive=FALSE
# Allow the current user to perform certain actions without being prompted for
# administrator credentials. (Requires Professional Edition)
#wrapper.ntservice.permissions.1.account=CURRENT_USER
#wrapper.ntservice.permissions.1.allow=START, STOP, PAUSE_RESUME